Зацените подборку ... интересно знать мнение специолистов ;) , + колонки будут идти временно на родных проводах в дальнейшем будет приобретен еще уселитель под них..(подборка для братишки ,его же выбор... ) Автомобиль -Сузуки свифт - слушает 60 % реп и остальные песни в том же духе -40% рок и т.д.
Магнитола JVC -номерацию непомню ,
Volfenhag ZX-8200
1000W Max, 2-Channel Amplifier with Bass Remote
- 1000 watts, 2-channel amplifier
- Ultra slim 1-1/4" height for a compact installation
- Blue light illuminated right and left sides
- Blue light illuminated cooling fan
- Blue light illuminated terminals
- Tri-mode capable
- Remote bass control with 20ft. wire
- 2 ohms stereo stable, 4 ohms momo
- 2-channel bridgeable power amplifier
- High and low RCA inputs available by the switch of a button
- RCA preamp line output
- Selectable HPF/Full/LPF crossovers:
- HPF (High-Pass Filter): 40Hz - 250Hz
- Full: 15Hz - 30kHz
- LPF (Low-Pass Filter): 40Hz - 250Hz
- Adjustable input sensitivity: 0.2V - 6V
- Bass boost: 0-18 dB
- PWM MOSFET power supply
- Soft delayed remote turn-on
- Dual color indicator LED (Power and Protection)
- Dimensions: 12.87"W x 1.5"H x 9.84"L
Amplifier Specifications:
Volfenhag ZX-4712DVX
- Amplifier Class N/A
- Number of Channels 2
- RMS Power (4 ohms) 120 watts x 2 channels
- RMS Power (2 ohms) 200 watts x 2 channels
- RMS Power (1 ohm) Not Stable
- Bridged RMS Power 400 watts x 1 channel
- Peak Power Output 1000 watts
- Minimum Impedance Unbridged 2 ohms
- Minimum Impedance Bridged 4 ohms
- THD at Rated RMS Power 0.1%
- Speaker Level Inputs No
- Amp Preamp Outputs Yes (1 Pair)
- Built-in Crossover Yes - HP / LP / Full
- High-Pass Crossover Frequency 40 - 250 Hz
- Low-Pass Crossover Frequency 40 - 250 Hz
- Subsonic Filter
- Signal-to-Noise Ratio N/A
- Channel Separation N/A
- Bass Boost 0 - 18 dB
- Bass/Gain Remote Yes
- Fan Cooled Yes
- Fuse Rating 20 A x 2
12" Dual 4 ohms Competition Subwoofer
Product Description:
Ready to crush the competition with a subwoofer with extreme power? Well then, the Volfenhag ZX4712DVX subwoofers are for you! The quality industrial engineered design and structure give these drivers the ability to take very large amounts of power hour after hour while delivering ultra clean sound and little distortion. The German concept didn't stop with specifications only as they also have a very sexy red appearance to add to the fantastic overall impression.
- Magnet: 160 oz. Double stacked Ferrite magnets
- Frame: 5 spoke Die-cast aluminum basket
- Cone: Reinforced aluminum curvilinear
- Surround: Oversized Buytl Rubber
- Spider: 2 Flat ultra excursion
- Program (conservative)
- T Yoke: Industrial Chromed Hex bolt retained,
- Bumped and Vented
- Double damper magnetic motor assembly
- Cooling: Double Vented (T Yoke and Motor Side vents)
- Voice Coils: 4 Layer Dual 4 Ohm High Temperature black Aluminum
- Voice Coil Diameter: 2.2"
- Nominal impedance: 4 ohms / per coil
- DC resistance (Re): 3.2 ohms each coil
- Frequency range: 20 Hz-1.1 kHz
- Fs:30 Hz
- QTS:.526
- QES:.614
- QMS:7.698
- VAS:56L
- SD:.0491M
- SPL:90 dB 1W/1m
- Xmax:16mm
Subwoofer Specifications:Volfenhag ZX-869R
- Subwoofer Size 12"
- Dual Voice Coil Yes
- Impedance 4 ohms
- Peak Power Handling 1000 watts
- RMS Power Handling 500 watts
- Woofer Surround Butyl Rubber
- Woofer Composition N/A
- Sealed Box Volume
- Ported Box Volume
- Sensitivity 90 dB
- Frequency Response
- Xmax (millimeters) N/A
- Top Mount Depth 6-3/10"
- Cutout Diameter 11-1/10"
6" x 9" 4-way Speakers
Product Description:
- 6" x 9" 4-way speakers
- 2-1/2" polymide cone midrange
- 1" neodymium dome tweeter
- 5/8" piezo tweeter
- red poly coating paper cone
- butyl rubber surround
- 800 watts peak power handling
Speaker Specifications:
- Speaker Size 6" x 9"
- Design 4-way
- Tweeter Design N/A
- Tweeter Composition N/A
- Woofer Composition N/A
- Woofer Surround N/A
- Sensitivity 94 dB
- Frequency Response 40 - 20k Hz
- RMS Power Handling 300 watts approx.
- Peak Power Handling 800 watts
- Impedance 4 ohms
- Top Mount Depth N/A
- Bottom-mount depth N/A
- Cutout Dimensions
- <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">25ft RCA Interconnect high definition audio cable shielded w/Built-in remote/ground wire <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(1) Gold plated Agu Fuse 80Amp AND 4 Gauge Water Resistant Inline Fuse Holder AGU type <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">20ft 4 Gauge Red Power Wire <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">6ft 4 Gauge Split loom for cable protection and organization <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">35ft 12 Gauge OFC Speaker Cable<LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">20ft 16 Gauge Blue remote turn on wire <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">4ft 4 Gauge Blue/Purple Ground Wire <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(5) Wire protectors to keep wire surround from being damaged <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Cable ties to organize and allow for a clean and efficient installation <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(4) 14-16 Gauge wire connectors for remote, speaker, and other cable connections <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(1) 10-12 Gauge butt connector for extending/crimping <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(2) 4 Gauge gold-plated connectors for ground and power connection to amplifier <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(1) 4 Gauge Gold ring terminal <LI style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">(2) 8-10 Gauge wire connectors for ground and power connection to amplifier
- (2) 14-16 Gauge butt connectors for extending/crimping
- (4) 10-12 Gauge speaker connectors for speaker wire connection to plate terminals
