-channel high end linear amplifier with adjustable subsonic filter (10 - 80 Hz) on channels C and D
http://www.audiotec-fischer.com/produkte_bilder/a6.jpg - Driver with class A technology
- Outputstage with 24 MosFet transistors
- RMI (realmixed input) for forming an optimised mono-summation signal from the left and right channels
- NFI (noisefree input) for distortion-free listening
- Mono/Bridged/ Stereo switch
- 8.0 volt input for connection to any signal source
- ADC - Anti Distortion Choke to eliminate distortions
- Intelligent temperature and power controlled switching power supply
- Separate speaker protection circuit with current limitation for speaker short-circuiting, cable contact with car chassis, low impedance and wrong connection
- CPS - Color Protection System
- SMD - Surface Mounting Devices for constant assembling quality
- Double-sided, extra strong (2x 110u) and copper plated pc-board for best power and signal transmission and protection against vibrations
- 24-karat gold-plated solid connectors suitable for 25 m²/ gauge 4 cables
- Temperature-optimised heatsink for highest efficiency
- 1% accurate components for perfect audiophile sound quality and maximum power
- Smoked-grey plexi cover with both side printing
Technical Data:
Cont. power rating RMS/Max. power at 4 Ohms RMS/12 V
6 x 60 Watt
Cont. power rating RMS/Max. power at 4 Ohms RMS/13,8 V
6 x 75/130 Watt
Cont. power rating RMS/Max. power at 2 Ohms RMS/13,8 V
6 x 125/215 Watt
Cont. power rating RMS/Max. power at 4 Ohms RMS/13,8 V bridged
3 x 220/350 Watt
Cont. power rating RMS/Max. power at 2 Ohms RMS/13,8 V bridged
1 x 400/640 Watt channel C/D
Cont. power rating RMS/Max. power at 1 Ohms RMS/13,8 V bridged
2 x 200/320 Watt channel C/D
Total harmonic distortion
< 0,009%
Signal to noise ratio
> 100 dB
Damping factor
> 450
Frequeny range
20 Hz -20 kHz
TIM distortion
< 0,016%
Input sensitivity
500 mV - 8 V
Fuse
4 x 20 A
Input impedance:
10 kOhm
Dimensions (HxWxD) mm
35 x 240 x 500
Weight netto
5,5 kg
НЕУЖЕЛИ лень на сайте посмотреть?:@#$%^: