SPECIFICATIONS
Frequency Response:
2.5 Hz - 20 kHz, +/- 0.25/0.5 dB
Signal to Noise Ratio:
> 110 dB, 115 dB typical
Channel Separation:
> 100 dB @ 20 kHz
Total Harmonic Distortion:
< 0.0025% @ 1 kHz
Amplitude Linearity:
> 95 dB; 98 dB typical
Phase Linearity:
+/- 0.1° @ 20 kHz
Maximum Jitter:
< 150 picoseconds RMS
D-A Converters:
20 bit, push-pull, independent for each channel
Oversampling Rate:
8 X (352.8 kHz)
Digital Input:
32 kHz - 48 kHz, Consumer standard SPDIF
Filters:
8x interpolating digital filter
two 2/3-order low-pass anti-imaging filters
Absolute Polarity:
0 deg or 180 deg switchable
Digital Inputs:
Coaxial:
75 Ω RCA
TOSlink fiber optic:
EIAJ Standard CP-340/RC-5720, 660 nm typical wavelength
ST module fiber optic:
AT&T standard, 820 nm typical wavelength
Outputs:
Analog Line Out: 2 V nominal, 600 Ω, suitable load >= 10 k Ω
Digital: 75 Ω RCA coaxial, 0.5 V peak-to-peak
Power Supplies:
3 separate transformers for digital; each analog channel
Power Requirement:
120 V, 60 Hz, 15W; may be re-wired for 220 - 240 V, 50 Hz
Dimensions:
19" W x 3" H (3 3/8 with feet) x 12" D
Net Weight:
15.4 lb.
http://www.parasound.com/vintage/dac1000.php
Социальные закладки