так. едем дальше:
Bridged: If the amplifier operates in Mono mode the
switch has to be set on Bridged position. In this case
both channels works as one (Mono) channel. On the
position “Bridged” both inputs A and B (6 and 7)
must be used.
мне непонятен этот режим, т.е. зачем он нужен! По инструкции усь в этом положении уже работает как моноблок, зачем нужны активные регуляторы входной чувствительности на каждый канал!!!