USB DAC и USB Audio для Android

**HoSStiA** · 03.12.2013 14:17

baradetsky, нужно любым доступным способом зайти в терминальную консоль устройства. Например, установив Android Terminal Emulator

После прочтения съесть!

https://play.google.com/store/apps/d...roidterm&hl=ru

, но есть масса других вариантов, от подключения при помощи adb для Windows, до запуска ssh-сервера на устройстве.

В терминале надо выполнить команду

Код:

lsmod

, которая покажет список загруженных модулей ядра. Если в этом списке значится

snd-usb-audio

, значит, поддержка USB Audio предоставлена "из коробки", и искать настройки надо примерно там же, где и в MINIX, к примеру:
http://magnitola.org/android/208802-...ml#post2147756

Если такой модуль не загружен, начинать придется с получения прав root'а в консоли, если их нет. Определяется просто. Если приглашение командной строки терминала заканчивается на '#', значит, необходимые права уже есть. Если же на '$', то необходимо попытаться выполнить команду

Код:

su

, примерно как тут, только reboot не надо набирать:

Название: 2519293.png
Просмотров: 1327

Размер: 35.7 Кб

Если приглашение сменилось с $ на #, устройство уже "рутировано", если нет - смотреть на форумах методы получения root для устройств на RK3188.

Возможно, необходимые модули собраны, но не загружены - можно быстро проверить командой:

Код:

ls -la /vendor/modules/snd-*

, но, при любом раскладе, с этого момента начинается уже серьезное шаманство по кастамизации Андроида.

**Anzic** · 17.02.2015 14:26

Сообщение от HoSStiA

но, при любом раскладе, с этого момента начинается уже серьезное шаманство по кастамизации Андроида.

Прошу помощи уважаемого HoSStiA
На данный момент имею следующие:
ГУ на MST786, HiFimeDIY Sabre U2 Asynchronous USB DAC. При подключении Sabre и запуске через USB Audio Player PRO музыка играет исправно. Это вселило кое какую надежду. При запуске команды cat /proc/asound/cards карточка появляется в списке. Но при запуске lsmod, snd-usb-audio не значиться. Как и нет ни каких модулей по ls -la /vendor/modules/snd-*. На dmesg выдает следующее:

После прочтения съесть!

u0_a46@android:/ $ su
u0_a46@android:/ # lsmod
8188eu 581437 0 - Live 0x00000000
ntfs_3g 186713 0 - Live 0x00000000 (O)
mali 88906 10 - Live 0x00000000 (O)
ump 26058 17 mali, Live 0x00000000 (O)
u0_a46@android:/ # ls -la /vendor/modules/snd-*
/vendor/modules/snd-*: No such file or directory
1|u0_a46@android:/ # dmesg
new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>usbcore: registered new interface driver option
<6>USB Serial support registered for GSM modem (1-port)
<4>MSTAR UDC INIT
<4>end porbe
<4>android_work: cdev is null
<6>file system registered
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<4>+USBInit
<4>+UTMI
<4>-UTMI
<4>HIGH SPEED
<4>ms_otg_run_state_machine
<4>otg set peripheral
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state undefined to a_idle
<6>mstar-otg mstar-otg: change from state a_idle to a_wait_vrise
<4>ms_BD154A_set_vbus 1
<4>+ ms_otg_usbc_switch
<4>start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
u0_a46@android:/ # dmesg
tered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>usbcore: registered new interface driver option
<6>USB Serial support registered for GSM modem (1-port)
<4>MSTAR UDC INIT
<4>end porbe
<4>android_work: cdev is null
<6>file system registered
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<4>+USBInit
<4>+UTMI
<4>-UTMI
<4>HIGH SPEED
<4>ms_otg_run_state_machine
<4>otg set peripheral
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state undefined to a_idle
<6>mstar-otg mstar-otg: change from state a_idle to a_wait_vrise
<4>ms_BD154A_set_vbus 1
<4>+ ms_otg_usbc_switch
<4>start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<6>usb 3-1: USB disconnect, device number 2
<4>root hub reinitial
u0_a46@android:/ # dmesg
start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<6>usb 3-1: USB disconnect, device number 2
<4>root hub reinitial
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<6>usb 3-1: new full speed USB device number 3 using Mstar-ehci-1
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>usb 3-1: opened by process 1267: UsbService host
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input3
<6>generic-usb 0003:262A:10E1.0002: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
u0_a46@android:/ #

Подскажите, куда дальше? Я так понимаю нужно искать эти либы под мой проц?
insmod /system/vendor/modules/snd-hwdep.ko
insmod /system/vendor/modules/snd-rawmidi.ko
insmod /system/vendor/modules/snd-usbmidi-lib.ko
insmod /system/vendor/modules/snd-usb-audio.ko