Парни, помогите с решением вопроса.

**mohov_a** · 15.01.2017 22:06

Сообщение от russtuff59

polkaudio

BRAX

**russtuff59** · 15.01.2017 22:11

Сообщение от mohov_a

BRAX

PA 1000

**russtuff59** · 15.01.2017 22:15

pa d1000

**russtuff59** · 15.01.2017 22:08

сейчас стоит один, в фи корпусе, захотел переделать звено

**mohov_a** · 15.01.2017 22:10

Сообщение от russtuff59

сейчас стоит один, в фи корпусе, захотел переделать звено

И осталось 5...

**russtuff59** · 16.01.2017 08:09

Сообщение от mohov_a

И осталось 5...

Pure Performance.
Features like a continuously variable 12dB/octave low-pass crossover, switchable subsonic filter 24dB/octave, switchable 180° phase inversion. and a remote subwoofer level control function enable you to fine-tune your setup to optimize its performance in a variety of configurations.

PA500.4 Features:
125 Watts x 4 continuous, 200 x 4 dynamic power (2 ohm load), 4 channel mode.
250 Watts x 2 (4 ohm) continuous power, 2 channel mode.

CEA-2006 compliant specifications for true, accurate power ratings.

4-channel, dual bridge-mono (2-channel), or dual simultaneous stereo/mono operation provide a variety of configurations and setups: 4-channel for front and rear speakers; 2 speakers and a sub; 2 subwoofers; or 2 subs and 4-channels in passive-tri mode.
2 ohm stable 4-channel operation.
High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-way Smart System Protection (SSP) circuits
Fully adjustable (50-500Hz) 12 dB/octave high- or low-pass crossover. Defeatable for full range (flat) operation.
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
RCA outputs (front channels only) for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuses included.
Light bar/fan output-Connect an optional LED light bar or cooling fan for custom installations.
Multi-color status LED gives instant information on amplifier operation.
Remote subwoofer level adjuster for rear channels included.

---------- Сообщение добавлено 16.01.2017 в 10:28 ----------

mohov_a, Pure Performance.
Features like a continuously variable 12dB/octave low-pass crossover, switchable subsonic filter 24dB/octave, switchable 180° phase inversion. and a remote subwoofer level control function enable you to fine-tune your setup to optimize its performance in a variety of configurations.

PA500.4 Features:
125 Watts x 4 continuous, 200 x 4 dynamic power (2 ohm load), 4 channel mode.
250 Watts x 2 (4 ohm) continuous power, 2 channel mode.

CEA-2006 compliant specifications for true, accurate power ratings.

4-channel, dual bridge-mono (2-channel), or dual simultaneous stereo/mono operation provide a variety of configurations and setups: 4-channel for front and rear speakers; 2 speakers and a sub; 2 subwoofers; or 2 subs and 4-channels in passive-tri mode.
2 ohm stable 4-channel operation.
High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-way Smart System Protection (SSP) circuits
Fully adjustable (50-500Hz) 12 dB/octave high- or low-pass crossover. Defeatable for full range (flat) operation.
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
RCA outputs (front channels only) for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuses included.
Light bar/fan output-Connect an optional LED light bar or cooling fan for custom installations.
Multi-color status LED gives instant information on amplifier operation.
Remote subwoofer level adjuster for rear channels included.

**Dawa** · 16.01.2017 09:22

Сообщение от russtuff59

Pure Performance.
Features like a continuously variable 12dB/octave low-pass crossover, switchable subsonic filter 24dB/octave, switchable 180° phase inversion. and a remote subwoofer level control function enable you to fine-tune your setup to optimize its performance in a variety of configurations.

PA500.4 Features:
125 Watts x 4 continuous, 200 x 4 dynamic power (2 ohm load), 4 channel mode.
250 Watts x 2 (4 ohm) continuous power, 2 channel mode.

CEA-2006 compliant specifications for true, accurate power ratings.

4-channel, dual bridge-mono (2-channel), or dual simultaneous stereo/mono operation provide a variety of configurations and setups: 4-channel for front and rear speakers; 2 speakers and a sub; 2 subwoofers; or 2 subs and 4-channels in passive-tri mode.
2 ohm stable 4-channel operation.
High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-way Smart System Protection (SSP) circuits
Fully adjustable (50-500Hz) 12 dB/octave high- or low-pass crossover. Defeatable for full range (flat) operation.
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
RCA outputs (front channels only) for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuses included.
Light bar/fan output-Connect an optional LED light bar or cooling fan for custom installations.
Multi-color status LED gives instant information on amplifier operation.
Remote subwoofer level adjuster for rear channels included.

---------- Сообщение добавлено 16.01.2017 в 10:28 ----------

mohov_a, Pure Performance.
Features like a continuously variable 12dB/octave low-pass crossover, switchable subsonic filter 24dB/octave, switchable 180° phase inversion. and a remote subwoofer level control function enable you to fine-tune your setup to optimize its performance in a variety of configurations.

PA500.4 Features:
125 Watts x 4 continuous, 200 x 4 dynamic power (2 ohm load), 4 channel mode.
250 Watts x 2 (4 ohm) continuous power, 2 channel mode.

CEA-2006 compliant specifications for true, accurate power ratings.

4-channel, dual bridge-mono (2-channel), or dual simultaneous stereo/mono operation provide a variety of configurations and setups: 4-channel for front and rear speakers; 2 speakers and a sub; 2 subwoofers; or 2 subs and 4-channels in passive-tri mode.
2 ohm stable 4-channel operation.
High-speed MOSFET switching power supply and high current bipolar output transistors pump maximum voltage and high current to your speakers or subwoofers.
Double layer fiberglass epoxy printed circuit boards for more rigidity, less shrinkage and a smaller overall amp footprint.
6-way Smart System Protection (SSP) circuits
Fully adjustable (50-500Hz) 12 dB/octave high- or low-pass crossover. Defeatable for full range (flat) operation.
Switchable 8 dB bass boost at 40Hz for extra bass thump.
Variable input gain optimizes match with different signal sources (250mv to 7.5V).
RCA outputs (front channels only) for easy daisy chaining of other amplifiers.
Mounting hardware with rubber isolation grommets and extra fuses included.
Light bar/fan output-Connect an optional LED light bar or cooling fan for custom installations.
Multi-color status LED gives instant information on amplifier operation.
Remote subwoofer level adjuster for rear channels included.

Где тут моноблок?

---------- Сообщение добавлено 16.01.2017 в 09:24 ----------

Сообщение от mohov_a

я так понимаю 4-х канальник без сабсоника. Не советую 12-ки даже маломощные. А про оформление ФИ забыть без нормального усилителя.
зы не нужно мнго букф конкретно марку и модель усилителя укажите

Утром глаза не протер? Советчик блин!

**mohov_a** · 15.01.2017 22:21

ЧО за му-хрю!!! Где характеристики? К 7-й странице ждать?!?

---------- Сообщение добавлено 15.01.2017 в 22:22 ----------

Сообщение от russtuff59

вот нашел такую схему

Нажмите на изображение для увеличения
Название: 1135aau-960.jpg
Просмотров: 0
Размер: 98.9 Кб
ID: 1095418

долго искал...

**mohov_a** · 16.01.2017 09:16

я так понимаю 4-х канальник без сабсоника. Не советую 12-ки даже маломощные. А про оформление ФИ забыть без нормального усилителя.
зы не нужно мнго букф конкретно марку и модель усилителя укажите

**russtuff59** · 16.01.2017 09:37

Сообщение от mohov_a

я так понимаю 4-х канальник без сабсоника. Не советую 12-ки даже маломощные. А про оформление ФИ забыть без нормального усилителя.
зы не нужно мнго букф конкретно марку и модель усилителя укажите

Polk audio pa500.4