USB DAC и USB Audio для Android

Сообщение от Rover

А вот если конвертер может 44.1 (есть и такие) то на выходе мы получим 44.1/16 - к этому и надо стремиться, ресемплинг качества не добавляет.

Именно!
Подняв этот вопрос, я просто хочу добавить понимания в ситуации с андройдом для тех, кто обходит его стороной и боится.....потому, что кто-то, когда-то сказал....Ведь переубедить потом в обратном, порой намного сложнее...

Сообщение от HoSStiA

но, при любом раскладе, с этого момента начинается уже серьезное шаманство по кастамизации Андроида.

Прошу помощи уважаемого HoSStiA
На данный момент имею следующие:
ГУ на MST786, HiFimeDIY Sabre U2 Asynchronous USB DAC. При подключении Sabre и запуске через USB Audio Player PRO музыка играет исправно. Это вселило кое какую надежду. При запуске команды cat /proc/asound/cards карточка появляется в списке. Но при запуске lsmod, snd-usb-audio не значиться. Как и нет ни каких модулей по ls -la /vendor/modules/snd-*. На dmesg выдает следующее:

После прочтения съесть!

u0_a46@android:/ $ su
u0_a46@android:/ # lsmod
8188eu 581437 0 - Live 0x00000000
ntfs_3g 186713 0 - Live 0x00000000 (O)
mali 88906 10 - Live 0x00000000 (O)
ump 26058 17 mali, Live 0x00000000 (O)
u0_a46@android:/ # ls -la /vendor/modules/snd-*
/vendor/modules/snd-*: No such file or directory
1|u0_a46@android:/ # dmesg
new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>usbcore: registered new interface driver option
<6>USB Serial support registered for GSM modem (1-port)
<4>MSTAR UDC INIT
<4>end porbe
<4>android_work: cdev is null
<6>file system registered
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<4>+USBInit
<4>+UTMI
<4>-UTMI
<4>HIGH SPEED
<4>ms_otg_run_state_machine
<4>otg set peripheral
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state undefined to a_idle
<6>mstar-otg mstar-otg: change from state a_idle to a_wait_vrise
<4>ms_BD154A_set_vbus 1
<4>+ ms_otg_usbc_switch
<4>start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
u0_a46@android:/ # dmesg
tered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>usbcore: registered new interface driver option
<6>USB Serial support registered for GSM modem (1-port)
<4>MSTAR UDC INIT
<4>end porbe
<4>android_work: cdev is null
<6>file system registered
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<4>+USBInit
<4>+UTMI
<4>-UTMI
<4>HIGH SPEED
<4>ms_otg_run_state_machine
<4>otg set peripheral
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state undefined to a_idle
<6>mstar-otg mstar-otg: change from state a_idle to a_wait_vrise
<4>ms_BD154A_set_vbus 1
<4>+ ms_otg_usbc_switch
<4>start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<6>usb 3-1: USB disconnect, device number 2
<4>root hub reinitial
u0_a46@android:/ # dmesg
start host register setting===>
<4>[USB] enable monkey test term overwrite 0xC3
<4>end probe_driver
<4>- ms_otg_usbc_switch
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>mmcblk0: mmc0:0001 016G92 14.6 GiB
<6>mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
<6>[EMMC] checking EMMC partitions...
<6>eMMC_pads_switch FCIE_eMMC_SDR
<6>eMMC_FCIE_EnableDDRMode
<6>eMMC_pads_switch FCIE_eMMC_DDR
<6>eMMC 15027MB
<6>[ eMMC_ReadPartitionInfo_Ex() ]
<6>eMMC: found Part Info 0
<6>[EMMC] partition[1]: start=0x00007C00, count=0x00000400, name='misc'
<6>[EMMC] partition[2]: start=0x00008000, count=0x00003000, name='bootlogo'
<6>[EMMC] partition[3]: start=0x0000B000, count=0x00005000, name='recovery'
<6>[EMMC] partition[4]: start=0x00010000, count=0x00004000, name='boot'
<6>[EMMC] partition[5]: start=0x00014000, count=0x00073000, name='system'
<6>[EMMC] partition[6]: start=0x00087000, count=0x001A6000, name='data'
<6>[EMMC] partition[7]: start=0x0022D000, count=0x00096000, name='cache'
<6>[EMMC] partition[8]: start=0x002C3000, count=0x00004000, name='pqbin'
<6>[EMMC] partition[9]: start=0x002C7000, count=0x01A92FF8, name='custcon'
<4>
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot1: unable to read partition table
<4>mmcblk0boot1: partition table beyond EOD, truncated
<6>[EMMC] checking EMMC partitions...
<3>failed to read part sector or is not emmc!!!
<6> mmcblk0boot0: unable to read partition table
<4>mmcblk0boot0: partition table beyond EOD, truncated
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<4>============ FB ============
<4>mdrvfb0_init START
<4>[SCA] Pnl init: 1
<4>MDrv_PNL_Init u32PnlRiuBaseAddr = 1f200000
<4>MDrv_PNL_Init u32PMRiuBaseAddr = 1f000000
<6>mdrvfb0_updateinfo !
<6>mdrvfb0_updateinfo: LCD_PANEL_WIDTH = [1024]
<6>mdrvfb0_updateinfo: LCD_PANEL_HEIGHT = [600]
<6>mdrvfb0_updateinfo: sg_videomemorysize_2 = 0x960000
<4>============ FB ============
<4>mdrvfb0_probe START
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0: sg_videomemorysize_2 is 0x960000 to allocate screen memory
<6>mdrvfb0 vir1=0xf0117000, phy1=0x68800000
<6>mdrvfb0 vir2=0xf076c000, phy2=0x69000000
<6>sg_mdrvfb0_fix.smem_start=0x69000000
<6>fb0: mdrv frame buffer device, using 9600K of video memory
<4>mdrvfb0_probe END
<4>============ FB ============
<6>mdrvfb0_device register success...
<4>mdrvfb0_init END
<4>============ FB ============
<4>GE driver inits
<4>mod_iic_init is invoked
<4>mod_iic2_init is invoked
<0>[SCA] SCA_DRV_PROBE !!!
<4>==13==> hub_port_init 1
<4>Plug in USB Port3
<6>input: MSB2522-Touchscreen as /devices/virtual/input/input0
<6>
<6>ms_rtc_init
<6>using rtc device, RTC, for alarms
<6>RTC RTC: rtc core: registered RTC as rtc0
<6>>> [sdmmc] ms_sdmmc Driver Initializing...
<4>>> [sdmmc_0] Get CD => (1)
<4>>> [sdmmc_0] CDZ use Ext GPIO IRQ: 2192
<6>>> [sdmmc_0] Probe Devices...(Ret:0)
<4>>> [sdmmc_1] CDZ use Ext GPIO IRQ: 2194
<6>>> [sdmmc_1] Probe Devices...(Ret:0)
<6>>> [sdmmc_2] Probe Devices...(Ret:0)
<6>fun: ms_pm_init
<4>[anwBTPower]: +anwBTPower_init
<4>[anwBTPower]: -anwBTPower_init
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
<6>usbcore: registered new interface driver snd-usb-audio
<4>soc-audio soc-audio: ASoC machine bach_snd_machine should use snd_soc_register_card()
<4>[Audio] BachSysInit - ChipRevision = 1
<4>[Audio] BachSysInit - BoardRevision = 2050
<6>asoc: bach-codec-dai-main <-> bach-cpu-dai mapping ok
<6>asoc: bach-codec-dai-gps <-> bach-cpu-dai mapping ok
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (15938 buckets, 63752 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP: cubic registered
<6>NET: Registered protocol family 10
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3
<6>usb 2-1: new high speed USB device number 2 using Mstar-ehci-3
<6>RTC RTC: setting system clock to 2015-02-17 10:15:51 UTC (1424168151)
<4><<-MST701-INFO->> MST701 driver install.
<4>Send byte 0xAA fail!
<6>ERROR: in ms_i2c_xfer_write: Send slave id(55) error
<6>GT9 chip version:9110_1050
<6>GT9 sensor id:0
<4>GT911
<6>input: TS-CAP-GT as /devices/virtual/input/input1
<4>[qst_style_init:626]--->qst_cfg = 0
<6>ALSA device list:
<6> #0: bach_snd_machine
<4>Warning: unable to open an initial console.
<6>Freeing init memory: 188K
<3>init: could not import file '/init.cedric.rc' from '/init.rc'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
<6>EXT4-fs (mmcblk0p5): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
<4>>> [sdmmc_0] Set IOS => Clk=16000000 (Real=14400000)
<6>mmc1: new high speed SDHC card at address 1234
<6>mmcblk1: mmc1:1234 SA32G 29.8 GiB
<6> mmcblk1: p1
<4>>> [sdmmc_1] Get CD => (0)
<4>>> [sdmmc_2] Get CD => (1)
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24069
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24056
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24118
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 24122
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23611
<7>EXT4-fs (mmcblk0p6): ext4_orphan_cleanup: deleting unreferenced inode 23586
<6>EXT4-fs (mmcblk0p6): 6 orphan inodes deleted
<6>EXT4-fs (mmcblk0p6): recovery complete
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>>> [sdmmc_2] Err: #Cmd_8 (0x000001AA)=>(E: 0x0008)(S: 0x000001AA)__(L:852)
<4>UMP: UMP device driver loaded
<4>Mali: Mali device driver loaded
<6>mstar-otg mstar-otg: V rise time up!
<4>ms_otg_run_state_machine
<4>+ms_otg_work, active = 1
<6>mstar-otg mstar-otg: change from state a_wait_vrise to a_wait_bcon
<6>mstar-otg mstar-otg: start host
<4>add hcd
<6>Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
<6>Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 3
<6>Mstar-ehci-1 Mstar-ehci-1.0: irq 2119, io mem 0xfd204800
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>mstar-otg mstar-otg: change from state a_wait_bcon to a_host
<4>@ OTG_STATE_A_HOST
<3>android_usb: already disabled
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<4>[XC,Version]
<4>0
<4>0
<4>6
<4>2
<4>7
<4>3
<4>7
<4>0
<4>
<4>
<6>usb 3-1: new full speed USB device number 2 using Mstar-ehci-1
<4>++++MDrv_PQ_Set_DisplayType_SC2_Sub++++
<4>++++MDrv_PQ_Set_DisplayType_SC2_Main++++
<4>++++MDrv_PQ_Set_DisplayType_SC1_Main++++
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input2
<6>generic-usb 0003:262A:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
<4>DSP code loaded successfully
<4>============ FB ============
<4>mdrvfb0_mmap START
<6>mdrvfb0_mmap vma->vm_start=40f5e000
<6> vma->vm_end=41666000
<6> vma->vm_pgoff =69000
<4>mdrvfb0_mmap END
<4>============ FB ============
<6>ms_startup(): UART5 request_irq() is passed.
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<6>ms_startup(): UART3 request_irq() is passed.
<3>wait_for_completion_timeout TIMEOUT
<3>package(90) sum failed
<4>X: ff 55 15 90 00 00 08 00 00 33 14 00 2f 17 47 34 33 80 00 00 00 00 fd ff 55 01 :C(1a)
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>sys_open():
<4>lowmem_shrink: convert oom_adj to oom_score_adj:
<4>oom_adj 0 => oom_score_adj 0
<4>oom_adj 1 => oom_score_adj 58
<4>oom_adj 2 => oom_score_adj 117
<4>oom_adj 4 => oom_score_adj 235
<4>oom_adj 9 => oom_score_adj 529
<4>oom_adj 15 => oom_score_adj 1000
<4>direct request memory success with name=VDEC
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=DIP
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=VE
<4>sys_release():
<4>sys_open():
<4>direct request memory success with name=MFE
<4>sys_release():
<4>sys_open():
<6>usbcore: registered new interface driver rtl8188eu
<6>acc_open
<6>acc_release
<6>usb 3-1: opened by process 1267: UsbService host
<6>usb usb3: opened by process 1267: UsbService host
<6>usb 2-1: opened by process 1267: UsbService host
<6>usb usb2: opened by process 1267: UsbService host
<6>usb usb1: opened by process 1267: UsbService host
<6>ADDRCONF(NETDEV_UP): p2p0: link is not ready
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>sys_open():
<3>Unknown SYS IOCTL Command -1073458321
<4>sys_release():
<3>init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>EXT4-fs (dm-0): re-mounted. Opts: (null)
<4>RTL871X: nolinked power save enter
<6>binder: 1560:1571 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<6>binder: 1560:1560 refcount change on invalid ref 57
<3>binder: transaction release 9741 bad handle 57
<6>ms_startup(): UART2 request_irq() is passed.
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: nolinked power save enter
<4>RTL871X: nolinked power save leave
<4>RTL871X: set ssid [AndroidAP] fw_state=0x00000008
<4>RTL871X: start auth
<4>RTL871X: auth success, start assoc
<4>RTL871X: assoc success
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:0, rate_bitmap:0x000ff005
<4>RTL871X: send eapol packet
<4>RTL871X: send eapol packet
<4>RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>qtaguid: iface_stat: create(wlan0): entry=d03ba600
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<7>wlan0: no IPv6 routers present
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:1, rate_bitmap:0x000f0000
<4>UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4> ==> rssi_level:2, rate_bitmap:0x000ff000
<6>usb 3-1: USB disconnect, device number 2
<4>root hub reinitial
<4>==13==> hub_port_init 1
<4>Plug in USB Port1
<6>usb 3-1: new full speed USB device number 3 using Mstar-ehci-1
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has an invalid interface number: 3 but max is 2
<4>usb 3-1: config 1 has no interface number 2
<6>usb 3-1: opened by process 1267: UsbService host
<6>input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/Mstar-ehci-1.0/usb3/3-1/3-1:1.0/input/input3
<6>generic-usb 0003:262A:10E1.0002: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-mstar-1/input0
<3>9:1: cannot get min/max values for control 2 (id 9)
u0_a46@android:/ #

Подскажите, куда дальше? Я так понимаю нужно искать эти либы под мой проц?
insmod /system/vendor/modules/snd-hwdep.ko
insmod /system/vendor/modules/snd-rawmidi.ko
insmod /system/vendor/modules/snd-usbmidi-lib.ko
insmod /system/vendor/modules/snd-usb-audio.ko

Подспорье для любителей CarPC на андроиде.
Появилось 2 плеера с поддержкой USB аудио: Onkyo HF Player и Hiby Music.
На онкио что бы все функцию связанные с USB audio заробило надо купить ключ,а Hiby отличается проигрыванием с локальной сети(мало ли кто NAS в авто вставит).

Онкио требует 4.1 и выше. А у хиби требования не указаны. Скорее всего тоже 4.1 и выше.

В платной версии идет поддержка хай-резов и апсемплинг в 192/24 через USB Audio.
Не в настройках счастье.

Итак, купил китай г.у. на Андроиде и на чипе рк 3188. Работает шикарно, никаких тормозор и глюков. Для пробы так же подключил простенький usb dac на pcm 2704 - "из коробки" как и ожидалось не работает, драйверов usb audio нет. НО usb audio player pro работает, громкость по цифре не регулирует пока что. Нашел драйвера от minix 7, он тоже на рк3188, пока не пробовал. Поразмыслив, я понял, что даже если драйвера лягут корректно, то радио же перестанет работать и наверное будет удобнее подключить и оптику и аналог к процессору, файлы flac/wav слушать через usb audio player pro, а все остальное через линейные выходы пускать. Наверное так.